The 28″ x 25′ Mobile Home Flex Mend Belly Bottom Repair – Patch Underbelly Holes/Rips are one of the most popular teams in Major League Baseball. If you’re looking for an official product to add to your wardrobe, we’ve got you covered. Shop 28″ x 25′ Mobile Home Flex Mend Belly Bottom Repair – Patch Underbelly Holes/Rips from the shop and be the first to wear your favorite player’s product.
This is a full-zip baseball 28″ x 25′ Mobile Home Flex Mend Belly Bottom Repair – Patch Underbelly Holes/Rips, which is designed in a way to give the best possible performance. It is made with lightweight fabric. It is available in your favorite team’s colors.
28″ x 25 ft Flex-Mend Tape
Finally – a neat, fast permanent and inexpensive way to mend holes, cuts, and tears in most mobile home bottom closure materials is at hand. Flex-Mend™ is a time tested mending product that matches the appearance and texture of bottom board closure materials used by most manufacturers in the mobile home industry today. Flex-Mend™ is a woven polyethylene film currently meeting all requirements for use as bottom board by the mobile home industry.
Uses:
Repair holes, cuts and tears resulting from plumbing repairs, weak seams and damage by cats and other animals quickly, neatly and permanently. Flex-Mend™ is also waterproof and unaffected by cold and can be applied in below-freezing temperatures and will hold regardless of the season.
It has been solid-coated with specially formulated, high tech adhesive, and has an easily removed release liner.
Polyethylene underbelly is a black tarp-like material. This material is found on the bottom of most manufactured homes built since the 80’s. If your underbelly is more rigid like a board use a different type of repair like Eternabond. We carry a full line of Eternabond if needed.
Very few tapes will stick to the underneath material of a mobile home, much less stick permanently. Duct tape will only work for a short period of time. If you want to eliminate taping the rips and tears in your underbelly over and over again, use Flex-Mend™ tape.
Repair Process:
- Ensure damaged area is clean and dry. If there insulation hanging out push it back into the hole
- Before cutting Flex-Mend™ be sure to leave at least 2-3 inches to overlay onto undamaged area
- Slowly remove Flex-Mend™ from the corner of the liner, careful not to remove entire liner yet. Be extra careful to not allow the tape to adhere to itself.
- Place exposed tape to edge of undamaged area where patch should start.
- Slowly remove liner and smooth edges along repaired seam to ensure full adhesion. Press firmly to ensure a full adhesion contact is made.
- Do not try to remove Flex-Mend once applied.
Need a different width or length?
We carry many popular widths: 2″, 4″, 6″, 8″, 18″ and 28″.
